|
|
|
ICP DAS PET-2255 - 8 Channel Digital Input and 8 Channel Sink Type Digital Output by ICP DAS
|
|
|
|
- Web server for configuration
- Support Modbus TCP/UDP, MQTT, and SNMP V2c protocols
- 2-port Ethernet switch (LAN bypass) for Daisy-chain wiring
- Supports Dual-watchdog
- I/O pair connection (push and pull)
- Built-in I/O: 8-ch DI (wet/dry), 8-ch DO (sink)
- LED display to indicate the I/O status
|
|
|
ICP DAS PET-2255
(P)ET-2255/(P)ET-2255-32 provides 8/16 wet/dry contact Digital Input channels and 8/16 sink-type Digital Output channels. With 2 Ethernet ports, (P)ET-2255/(P)ET-2255-32 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. It features optical isolation for 3000 Vrms of transient overvoltage protection but doesn’t provide Channelto-channel isolation. Each input channel can be used as a 32-bit counter and each output channel can drive 650/600 mA load. The poweron value and safe value of digital output channel are programmable. It can safely be used in applications where hazardous voltages are present. It features 8 kV ESD protection, 4 kV EFT protection, 3 kV surge and 3000 VDC I/O isolation to enrich the noise protection ability for industrial environment.
Specifications
- Built-in web server: yes
- CPU Module
- CPU: 32-bit ARM
- Watchdog timer: module, communication (programmable)
- 2-way Isolation: I/O: 3000 VDC
- EMS Protection
- EFT (IEC 61000-4-4): ±4 kV for Power Line
- ESD (IEC 61000-4-2):
- ±8 kV Contact for Each Terminal
±16 kV Air for Random Point
- Surge (IEC 61000-4-5): ±3 kV for Power Line
- Digital input/counter
- Channels: 8
- Type: Dry contact, Wet Contact
- Sink/Source (NPN/PNP):
- Dry: source
- Wet: sink/source
- ON voltage level:
- Dry: Close to GND
Wet: +5 to +50 VDC
- OFF voltage level:
- Dry: Open
Wet: +1 VDC (max.)
- Max. counts: 4,294,967,295 (32-bit)
- Frequency: 3 kHz
- Input impedance: 7.5 kn
- Overvoltage protection: 70 VDC
- Low pass filter: 1 to 6500 ms (0.08 Hz to 500 Hz)
- Digital Output
- Channels: 8
- Type: open collector
- Sink/source (NPN/PNP): sink
- Load voltage: +3.5 to +50 VDC
- load current: 650 mA/channel
- overvoltage protection: 60 VDC
- overload protection: 1.4 A (with short-circuit protection)
- short-circuit protection: yes
- power on value: programmable
- safe value: programmable
- Ethernet
- ports: 2 x RJ-45, 10/100 Base-TX, Switch Ports
- PoE: yes
- LAN bypass: yes
- Access control: password and IP filter
- Protocol: Modbus TCP, Modbus UDP, MQTT, and SNMP V2c
- Power
- Reverse polarity protection: yes
- consumption: 4.3W (max.)
- Powered from PoE: IEEE 802.3af, class 2
- powered from terminal block: 10~48 VDC
- Mechanical
- casing: plastic
- dimensions: 33 x 126 x 108 (W x L x H) mm
- Installation: DIN-Rail mounting
- Environment
- operating temp: -25~75ºC
- storage temp: -40~80ºC
- Humidity: 10~90% RH, non-condensing
|
|