|
|
|
Moxa ABC-01-M12 - Configuration backup and restoration tool with M12 Connection
by MOXA
|
|
|
|
- ABC-01 series with RS-232/M12 console port connection
- Backup and restore switch configuration files
- Load the system configuration automatically after system reboot
- Portable low-power design (requires no power supply)
- CE and FCC approved
|
|
|
The ABC-01-M12 configuration backup and restoration tool is designed with M12 connector that can be used to save and load the configuration of Moxa's ToughNet series EN50155 managed Ethernet switches through the switches' RS-232 console port. This simple yet powerful tool makes it much easier to back up a switch's system parameters, or even replace an existing switch with a new switch. With the ABC-01, you can quickly re-install a substitute switch (of the same model) or recover the entire system configuration, including IP address, if a switch failure occurs.
| • Interface |
| Connectors |
RS-232/M12 port |
| LED Indicators |
None |
| • Basic Operation |
| Storage Capacity |
128 KB Flash |
| Configuration |
Use the web console of Moxa’s managed switches |
| • Power Requirements |
| Input Voltage |
3 to 5 VDC (through the RS-232 port’s RTS signal) |
| • Physical Characteristics |
| Housing |
PVC molding, IP40 protection |
| Dimensions |
32.5 x 97 x 12 mm (1.28 x 3.82 x 0.47 in) |
| Weight |
ABC-01-M12: 60 g |
| Mounting Method |
M4 screws (< 4 mm) |
| Cable Length |
35 cm ±3 cm (including connector) |
| • Environmental Limits |
| Operating Temperature |
0 to 60°C (32 to 140°F) |
| Storage Temperature |
-20 to 70°C (-4 to 158°F) |
| Ambient Relative Humidity |
5 to 95 % (non-condensing) |
| • Standards and Certifications |
| EMI |
FCC Part 15 Subpart B Class A, EN 55022 Class A |
| EMS |
EN 61000-4-2 (ESD) Level 2(ABC-01 Series), EN 61000-4-2 (ESD) Level 3(ABC-02 Series), EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3 |
| • Warranty |
| Warranty Period |
5 years |
|
|
|
|
|
|
