10
by ORing Industrial Networking

Write a review

IGPS-1082GP-24V_SUMMARY.html

Support 8 ports IEEE 802.3at compliant PoE and total power budget is 120W with maximum 30W per port of 24V model

Total power budget is 180Watts with maximum 30Watts per port of IGPS-1082GP model

Support up to 9.6K Bytes Jumbo Frame

Support up to 4Mbit Packet buffer

Support auto-negotiation and auto-MDI/MDI-X

Support store and forward transmission

Support flow control

Provided relay output for power failed warning system

Provide DIP-switch to setting SFP speed

Rigid IP-30 housing design

DIN-Rail and wall mounting enabled

Description
Specification
Datasheet

IGPS-1082GP-24V_DESCRIPTION.html

IGPS-1082GP-24V is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports.\xa0 P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. \xa0And support wide operating temperature from -40^oC to 75^oC.\xa0 Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.

IGPS-1082GP-24V.html

Specifications
ORing Switch Model	IGPS-1082GP	IGPS-1082GP-24V
Physical Ports	-
10/100/1000Base-T(X) with P.S.E. Ports in RJ45 Auto MDI/MDIX	8 (P.S.E. with IEEE 802.3at)
100/1000Base-X with SFP port	2
Technology	-
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3af/at PoE specification
MAC Table	8k
Processing	Store-and-Forward
Processing	Store-and-Forward
Switch Properties	Switching latency: less than 7us Switching bandwidth: 20Gbps
Jumbo frame	Up to 9.6K Bytes
Packet buffer	4Mbit
LED Indicators	-
Power Indicator (PWR)	Green : Power LED x 3
Fault Indicator	Amber : Indicate power failed even warning
10/100/1000Base-T(X) RJ45 PoE Port Indicator	Green for Link/Act indicator Green for PoE enable indicator.
100/1000Base-X SFP Port Indicator	Green for port Link/Act.
Fault contact	-
Relay	Relay output to carry capacity of 1A at 24VDC
DIP-Switch	-
DIP-Switch 1	Power-2 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2	Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 3	DIP switch 3 and 4 (ON) : SFP speed setting to 100Mbps
DIP-Switch 4	DIP switch 3 and 4 (OFF) : SFP speed setting to 1000Mbps(default)
Power	-
Redundant Input power	Dual DC inputs. 50 ~ 57VDC on 6-pin terminal block.	Dual DC inputs. 12 ~ 57VDC on 6-pin terminal block.
Power consumption (Typ.)	11W	11W
PoE Power budget	180W	60W at 12~24VDC, 120W at 24~57VDC
Overload current protection	Present
Reverse polarity protection	Present
Physical Characteristic	-
Enclosure	IP-30
Dimension (W x D x H)	54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
Weight (g)	889g	916g
Environmental	-
Storage Temperature	-40 to 85C (-40 to 185F)
Operating Temperature	-40 to 75C (-40 to 167F)
Operating Humidity	5% to 95% Non-condensing
Regulatory approvals	-
EMC	EN55032, EN55024(CE EMC), FCC Part 15B, EN61000-3-2, EN61000-3-3
EMI	CISPR 32, EN55032, FCC Part 15B class A
EMS	IEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-4-8 (PFMF), IEC 61000-4-11 (DIP)
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25C )	TBD	TBD