ORing INJ-102GT - Industrial 2-port High Power PoE Injector (Gigabit)
by ORing Industrial Networking

Supports 2x10/100/1000Base-T(X) for power and data Output
Fully compliant with IEEE802.3at/802.3af
Auto protection for Over Voltage Power Input and over current output
Supports Power Output up to 30Watts at 50VDC input
IP-30 Rugged Case Design
DIN-Rail and Wall Mount Design

Description
Specification
Datasheet

The INJ-102GT PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50~57V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.

Physical Ports
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input	2
10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output	2
Operating Voltage
Input Voltage	50 VDC on 4-pin terminal block
Output Power	50V / 600mA, 30 Watts max. per port
LED Indicator
Power Indicator	PWR / Ready: 1 x LED Green On: Power is on and functioning Normally.
PoE Indicators	2 x LED Blue On: PoE Device Link Blue Blinking: Detecting PoE Device Blue Off : None PoE Device Detected
Protection
Short Circuit Protection	Present
Over Load Protection	Present
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g)	250g
Environmental
Storage Temperature	-40 to 80°C (-40 to 176°F)
Operating Temperature	-20 to 70°C (-4 to 158°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A,
EMS	EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1
Warranty	2 years