Tycon Systems TP-DCDC-1248 - 9-36VDC IN 48V PoE OUT 24W DC to DC Converter and POE injector
by TYCON SYSTEMS

Input Voltage 9-36VDC; Output 48VDC Passive PoE
High Power 24W
Short Circuit, Over Current and Over Voltage Protection
High Temperature Operation
Removable Wire Terminal Input for up to 12AWG wires

Description
Specification
Datasheet

TP-DCDC-1248 is the DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 48VDC Power Over Ethernet voltage from a 12 or 24V battery system.

They have an integrated PoE injector to apply the regulated 48VDC to the CAT5 Ethernet cable. The input voltage must be between 9VDC and 36VDC.

They accept data-in to a shielded RJ45 Jack and provide data-out and PoE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-).

They have various protections for surge, short circuit and overload. The units have power output of 24W.

DC Input Voltage	9VDC – 36VDC
DC Input Connector	Removeable Screw Type Compression Wire Terminal (12 AWG Max)
DC Output Voltage	48V (Passive)
Data in & Data/POE Output Connector	RJ45 (Shielded)
Output Current (max)	0.5A
Output Power (max)	24W
Self Consumption Power	1W
Efficiency (min)	75%
Line Regulation	1%
Load Regulation	5%
Ripple	1%
Noise	1%

EMC Standards	FCC Class B EN55022 Class B
Safety Standards	UL1950, CSA 22.2 &TUV EN60950
Operating Temp	-30 to +60°C (-22 to +140°F)
Operating Humidity	5% - 90%