|
|
|
ICP DAS NS-208PSE-IP67 - NS-208PSE in IP 67 case
by ICP DAS
|
|
|
|
Industrial 8-port unmanaged IP67 Ethernet switch with PoE, Includes IP67 RJ-45 Plug x 8, IP67 Power Plug x 1, Cap with Tether x 8
|
|
|
-IP67.jpg)
The NS-208PSE-IP67/NS-208-IP67 is designed for industrial applications in harsh environments. The rugged RJ-45 ensure tight, robust connections, and guarantee reliable operation, even for applications that are subject to high vibration and shock.
The NS-208PSE-IP67 PoE switch provides 8 fast Ethernet with 8 IEEE 802.3af compliant PoE ports. The switch is classified as power source equipment (PSE) and provide up to 15.4 W of power per port.
The Ethernet switch support IEEE 802.3/802.3u/802/3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing, and provide an economical solution for your industrial Ethernet network.
- Automatic MDI/MDI-X crossover for plug-and-play
- Store-and-forward architecture
- Each port supports both 10/100 Mbps speed auto negotiation
- Full duplex IEEE 802.3x and half duplex backpressure flow control
- Rugged RJ-45 Connector for anti-vibration and shock
- IP67 grade protection approval
- 8 PoE ports with Power Sourcing Equipment (PSE) operation
(NS-208PSE-IP67 series)
- Auto-detection of PD (powered devices) and automatic power management (NS-208PSE-IP67 series)
- Over-temperature, over-current and over/under-voltage detection (NS-208PSE-IP67 series)
Comparison Table of 5/8 Port IP67 Ethernet Switch
| Models |
NS-205-IP67 |
NS-205-IP67/DIN |
NS-205PSE-IP67 |
NS-205PSE-IP67/DIN |
NS-208PSE-IP67 |
NS-208-IP67 |
| PoE |
– |
802.3af x 4 |
802.3af x 8 |
| Input Voltage Rangeg |
+10 ~ +30 VDC (1 kV Isolated) |
+46 ~ +53 VDC |
+12 ~ 53 VDC |
| Installation |
Wall Mounting |
DIN-Rail or Wall Mounting |
Wall Mountin |
DIN-Rail or Wall Mounting |
DIN-Rail or Wall Mountin |
Dimensions (W x H x D)
(Unit: mm) |
85 x 76 x 137 |
89 x 90 x 138 |
85 x 76 x 137 |
89 x 90 x 138 |
190 x 155 x 104 |
| Technology |
| Standards |
IEEE 802.3, 802.3u, 802.3x, 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
| Processing Type |
Store & forward; wire speed switching |
| MAC Addresses |
1024 |
| Memory Bandwidth |
2 Gbps |
| Frame Buffer Memory |
512 Kbit |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Interface |
| LED Indicators |
PWR, Link/Act , Power Device is detected |
| Ethernet Isolation |
1500 Vrms 1 minute |
| Connection |
Rugged RJ-45 |
| Power Input |
| Input Voltage Range |
+46 ~ +53 VDC for PoE output |
| Power Consumption |
0.05 A @ 48 VDC without PD loading;
1.45 A @ 48 VDC with PD full loading |
| Protection |
Power reverse polarity protection |
| Connection |
IP67 PWR Plug |
| PoE Technology |
| PoE Compliance |
100% IEEE 802.3af compliant |
| PoE Classification |
PSE (Power Sourcing Equipment) |
| PoE Voltage |
+46 ~ +48 VDC depending on power input |
| PoE Power |
Up to 15.4 watts per channel |
| PoE Operation |
Automatic detection and power management |
| PoE Pin Assignments |
V+ (Pin 1, 2), V- (Pin 3, 6) |
| PoE Disconnect Mode |
DC disconnect |
| Mechanical |
| Casing |
Plastic (Flammability UL 94V-0) |
| Environmental Rating |
Protection rating IP67 for Operating Temperature -10 °C ~ +60 °C |
| Protection rating IP66 for for Operating Temperature -40 °C ~ +75 °C |
| Dimensions (W x L x H) |
190 mm x 155 mm x 104 mm |
| Installation |
DIN-Rail or Wall Mounting |
| Environment |
| Operating Temperature |
-10 °C ~ +60 °C (Protection rating IP67) |
| -40 °C ~ +75 °C (Protection rating IP66) |
| Storage Temperature |
-10 °C ~ +60 °C (Protection rating IP67) |
| -40 °C ~ +75 °C (Protection rating IP66) |
| Ambient Relative Humidity |
100% RH for Operating Temperature -10 °C ~ +60 °C |
| 10% ~ 90% RH, non-condensing for Operating Temperature -40 °C ~ +75 °C |
|
|
|
|
