ICP DAS FR-32P/DIN - 32 points isolated digital input module
by ICP DAS

32-channel FRNet Isolated Digital Input Module

Description
Specification
Datasheet

The FR-2156T has 8-channels isolated photo-coupler output and the transfer speed is fixed at 1M bps. The default signal connector of FR-2156T is a 12-pin 0.15” screw terminal connector.

According to different applications, the users can choose suitable modules. The FR-2100 I/O module has a FRNet interface. The users can daisy chain several FR-2100 modules together. Via FRNet, the FR-2100 modules can extend the discrete I/O control of PC and PAC easily. For further information about the networking of FR-2100 series; please refer to literature related to I-7188EF, I-8172, FRB-200

Built-in Wire-saving FRnet DI/DO control
High-speed transmission reliability
Simple synchronization mechanism
No software overhead on protocol processing
Supporting broadcasting (1:n data transmission)
Duplicating output easily
Fixed I/O scan-time and I/O synchronization
DIN-Rail mountable

Industrial Automation
Remote I/O control
Wire-saving application
Built-in Wire-saving FRnet DI/DO control

Product Information
Communication speed	250K bps
Communication distance	400m max
Number of channels	32
Input low voltage	0 ~ +/-1V
Input high voltage	3.5 VDC ~ 30 VDC
Input impedance	3K; 1/4W
Response time	1 KHz max
Power Requirement	10~30V
Wire cable	CPEV 0.9S (2P Twisted-pair wire)
Power consumption	24V@140mA(max)
Operating temperature	-25°C ~ +75°C
Operating humidity	10% ~ 90% RH, non-condensing
Storage temperature	-30°C ~ +85°C
Storage humidity	5% ~ 95% RH, non-condensing
Dimensions	173 mm x 117 mm