IVC-4011-T-V2 - IP30 Industrial Ethernet Extender, 4-Port RJ45

Antaira IVC-4011-T-V2 - IP30 Industrial Ethernet Extender, 4-Port RJ45 (LAN), 1-Port BNC, 1-Port RJ11 (-40°~ 75°C)
by ANTAIRA

Name: Antaira IVC-4011-T-V2 - IP30 Industrial Ethernet Extender, 4-Port RJ45 (LAN), 1-Port BNC, 1-Port RJ11 (-40°~ 75°C)
Brand: iComTech
SKU: IVC-4011-T-V2
Price: 398.0 USD

Write a review

IVC-4011-T-V2_SUMMARY.html

Features

IP-30 metal case protection, DIN Rail and Wall Mount design
ITU-T G.993.5 G.Vectoring and G.INP
Upstream/Downstream bandwidth up to 200/100Mbps
CO/CPE mode selectable via DIP switch
Selectable target band plan and SNR margin
Uses existing RG59/RG6 coaxial cable
Used in pairs to extend Point-to-Point connection up to 1.2km
Supports IEEE 802.1Q VLAN tag transparency
Supports 6000 VDC Ethernet ESD protection
12 to 48V DC, 24V AC
Redundant power with polarity reverse protect function
Support extensive LED indicators for network diagnostics

Description
Specification
Datasheet

IVC-4011-T-V2_DESCRIPTION.html

IVC-4011-T-V2 - is an Industrial Ethernet Extender that has a switching architecture with 4 RJ-45 10/100/1000Mbps Ethernet ports and one asymmetric or symmetric Ethernet over VDSL port - the VDSL port can be RJ-11 or BNC connector. The embedded BNC or RJ-11 port is allowing customers to continue using their existing network with the current coaxial cable or telephone wire without the need of rewiring.

The IVC-4011-T-V2 provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments like plant floors or in curbside traffic control cabinets. The IVC-4011-T-V2 designs with IP-30 metal case with DIN Rail or Wall Mount support. It also can operate under any extreme ambient weather temperature range from -40 to 75 degree C.

IVC-4011-T-V2.html

Standards	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) ITU-T G.993.5 G.Vectoring and G.INP ITU-T G.998
VDSL Compliance	VDSL-DMT ITU-T G.993.1 VDSL ITU-T G.997.1 ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) ITU-T G.993.5 G. Vectoring ITU-T G.998 G.INP
ADSL Compliance	Capable of ADSL2/2+ standard ITU G.992.3 G.dmt.bis ITU G.992.5 G.dmt.bisplus Data Rate: Up to 24Mbps
Ports	10/100/1000Base-TX: 4 RJ-45, auto negotiation and auto-MDI / MDI-X Coaxial: 1 BNC, female connector Phone-Line: 1 RJ-11, female connector
LED Indicators	Power 1/Power 2: Green Fault: Red 1000BASE-T LNK/ACT: Green 10/100BASE-TX LNK/ACK: Green VDSL: Green CO: Green CPE: Green
Dip Switch	4 Position DIP Switch
Cabling	Coaxial cable: 75 ohmRG-6/U cable, less than12Ω/1000 ft RG-59/U cable, less than 30Ω/1000 ft. Max. 1.2km with data transmission (3.937ft.)) Twisted-pair telephone wires (AWG-24 or better) up to 1.2km (3.937ft.)
Functionality	Select CO or CPE mode Select G.INP or Interleaved mode Select Band Profile (Asymmetric or Symmetric) Select SNR of 12dB or 8dB
Switching Architecture	Store-and-Forward
MAC Table Size	2K
Flow Control	Back pressure for half duplex IEEE 802.3x pause frame for full duplex
Jumbo Frame	9K bytes
Housing	Metal, IP30 protection
Dimensions	32 x 87.8 x 135 mm (W x H x D)
Weight	Unit: 0.41 lb Shipping: 0.71 lb
Mounting	DIN-Rail mounting, Wall mounting
Input Voltage	DC Input: Dual 12~48V DC, 0.4A max. 24V AC
ESD Protection	6KV DC
Power Consumption	5.7 Watts
Operating Temperature	-40°C to 75°C
Storage Temperature	-40°C ~ 85°C
Ambient Relative Humidity	5 to 90%, (non-condensing)
Certifications	FCC Part 15 Class A, CE