1000BaseT(X) ports or 1
by MOXA

IEC 61850-3, IEEE 1613 (power substations) compliant
IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant
PRP/HSR Coupling and QuadBox functions supported
Ethernet console reserved for local access
Built-in MMS server, based on IEC 61850-90-4 switch modeling for power SCADA
Hardware-based IEEE 1588v2 PTP supported
Design ready for NERC CIP compliance system development
Isolated redundant power inputs with universal 24/48 VDC or 110/220 VDC/VAC power supply range

-40 to 85°C operating temperature range

Description
Specification
Datasheet

The PT-G503-PHR-PTP series redundancy boxes (RedBoxes) are compliant with the latest standardized redundancy protocols for industrial automation networks, IEC 62439-3 Clause 4 (Parallel Redundancy Protocol, PRP) and IEC 62439-3 Clause 5 (High-availability Seamless Redundancy, HSR). PRP/HSR ensures the highest system availability and data integrity for mission-critical applications in electrical substation and/or process automation systems that require zero recovery time redundancy. The redundant protocols Coupling and QuadBox are also supported. With Coupling and QuadBox, HSR rings can be connected to make the redundant network more versatile. The PT-G503-PHR-PTP series comes with three 10/100/1000BaseT(X) and 100/1000BaseSFP slot combo ports.

One slot (INTERLINK port) is for an internal link for connecting with a SAN (Singly Attached Node). The other two ports (LAN A and LAN B ports) are for PRP/HSR redundant protocol communications. With this full Gigabit Ethernet port design, the PT-G503-PHR-PTP series provides high performance for PRP/HSR systems.

The PT-G503-PHR-PTP series also provides hardware-based IEEE 1588v2 PTP when in end-to-end one-step transparent clock mode for timing-critical applications and isolated redundant power inputs with 24/48 VDC or 110/220 VDC/VAC power supply ranges to increase the reliability of the power supply.

• Technology
Standards	IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX
Protocols	PRP/HSR, SNMPv1/v2c/v3, DHCP Client, BootP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog, LLDP, IPv6, SNMP Inform, NTP Client/Server
MIB	IEC 62439-3 MIB
• Interface
Gigabit Ethernet	3 x 10/100/1000BaseT(X) ports or 100/1000BaseSFP combo ports
Console Port	Ethernet console (10/100/1000 Mbps RJ45), USB-serial console (Type B connector)
Storage Port	USB storage (Type A connector for ABC-02-USB)
Button	Reset button
Alarm Contact	1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs	1 input with the same ground, but electrically isolated from the electronics• +13 to +30V for state “1” • -30 to +3V for state “0” • Max. input current: 8 mA
System LED Indicators	PWR1, PWR2, STATE, FAULT, PRP, HSR, QUADBOX, COUPLING
Port LED Indicators	A, B, ETHERNET CONSOLE, INTERLINK
• Power Requirements
Input Voltage	• WV: 24/48 VDC (18 to 72 VDC) • HV: 110/220 VDC/VAC (88 to 300 VDC, 85 to 264 VAC)
Input Current	• Max. 0.660/0.360 A @ 24/48 VDC • Max. 0.150/0.080 A @ 110/220 VDC • Max. 0.260/0.170 A @ 110/220 VAC
Overload Current Protection	Present
Connection	5-pin terminal block
Reverse Polarity Protection	Present
• Physical Characteristics
Housing	IP40 protection
Dimensions	80 x 160 x 110 mm (3.15 x 6.30 x 4.33 in)
Weight	1210 g
Installation	DIN rail mounting
• Environmental Limits
Operating Temperature	-40 to 85°C (-40 to 185°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Standards and Certifications
High Availability Automation Networks	IEC 62439-3
Safety	UL 508
EMI	FCC Part 15 Subpart B Class A, EN 55022 Class A
Power Automation	IEC 61850-3, IEEE 1613
Rail Traffic	EN 50121-4