|
|
|
- Supports 2x10/100/1000Base-T(X) for power and data Output
- Fully compliant with IEEE802.3at/802.3af
- Auto protection for Over Voltage Power Input and over current output
- Supports Power Output up to 30Watts at 50VDC input
- IP-30 Rugged Case Design
- DIN-Rail and Wall Mount Design
|
|
|
The INJ-102GT PoE Injector is an advanced IEEE802.3at compliant device with
Intelligent Detection, that provided 2-ports 10/100/1000Base-T(X) PoE outputs.
The device does not turn on power until it detects a valid PoE signature from
the PoE devices attached downstream on the Ethernet cable. This protection
against damage to non-PoE compliant equipment which may be connected to the
Ethernet cable. Because of this intelligent detection, only an IEEE
802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector.
Typically in gigabit networks the maximum allowable CAT5 cable length is about
100 meters, due to the limitation of the Ethernet standards. Because of its
50~57V insertion, the installer doesn’t need to worry about voltage drops caused
by cable length. The INJ-102GT PoE Injector can function with any PoE P.D.
equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
| Physical Ports |
|
| 10/100/1000Base-T(X) in RJ-45 Ethernet Port Input |
2 |
| 10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output |
2 |
| Operating Voltage |
|
| Input Voltage |
50 VDC on 4-pin terminal block |
| Output Power |
50V / 600mA, 30 Watts max. per port |
| LED Indicator |
|
| Power Indicator |
PWR / Ready: 1 x LED
Green On: Power is on and functioning Normally. |
| PoE Indicators |
2 x LED
Blue On: PoE Device Link
Blue Blinking: Detecting PoE Device
Blue Off : None PoE Device Detected |
| Protection |
|
| Short Circuit Protection |
Present |
| Over Load Protection |
Present |
| Physical Characteristics |
|
| Enclosure |
IP-30 |
| Dimensions (W x D x H) |
26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch) |
| Weight (g) |
250g |
| Environmental |
|
| Storage Temperature |
-40 to 80°C (-40 to 176°F) |
| Operating Temperature |
-20 to 70°C (-4 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5
(Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |
| Warranty |
2 years |
|
|
|
|
