05059984 - PINJ30 PoE Power Injector

1000Base-T , 30 watts, IEEE 802.3at compliant. PoE+ and PoE compatib
by PERLE

IEEE 802.3at ( PoE+ ) compliant with 2-event classification
IEEE 802.3af ( PoE ) backward compatible
Output power up to 30W over 100 meters (328ft) UTP
Supports 10/100/1000Base-T applications
Automatically detects whether the connected device is PoE-capable to avoid sending power to a non-PoE device
Plug & Play: No configuration required

Description
Specification
Datasheet

The Perle PINJ30 is a single port, high power PoE+ mid-span injector. It acts as an intermediary device between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable.

Generating up to 30 Watts, the PINJ30 provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE 802.3at PoE+ standard (30W of power) and is backward compatible with IEEE802.3af PoE (15.4W of power). It is designed to power existing 10/100Base-T network devices and Gigabit devices such as IEEE 802.11ac access points and IP cameras.;

With the PINJ30, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.

Specifications	PINJ30
Data port	1x 10/100/1000Base-T RJ45
Data and Power port	1x 10/100/1000Base-T RJ45 for connecting to PoE PD
Power Over Ethernet Output	Pin Assignment and Polarity based on IEEE 802.3at ( ALT A ) Output 1/2 (+), 3/6 (–)
AC Input	100 to 240 VAC, 50 to 60Hz Universal Power 3 Pin AC-Inlet IEC-C14 ( IEC-C13 connector country specific power cord provided )
Back of product
Power Consumption	36.6 Watts maximum ( @ 30W PoE output )
Indicators	PWR: Solid green when AC power is on, off when AC power is not on PoE: Solid green when PoE port is supplying power, off when not
Environmental Specifications
Operating Temperature Ranges	0 to 40°C ( 32 to 104°F )
Storage Temperature Range	-40 to 70°C ( -40 to 158°F )
Operating Humidity Range	10 to 95% ( non-condensing )
MTBF	698,142 hours @ 25°C *
Chassis	Rugged Metal Case with an IP20 ingress protection rating
Product Weight and Dimensions
Weight	0.39 kg ( 0.9 lbs )
Dimensions	73 x 36 x 154 (mm) , 2.87 x 1,42 x 6.00 (in)
Packaging
Shipping Weight	0.73 kg ( 1.6 lbs )
Shipping Dimensions	22 x 17 x 7 ( cm ) 8.7 x 6.7 x 2.8 ( inch )
Standards and Certifications
Safety	UL 60950-1 EN 60950-1:2006+A11:2009+A1:2010+A12:2011 CE Mark
Emissions	EN55011 2009 + A1: 2010 ( Group 1 Class A )
EMC and Immunity	EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2,