ICP DAS DN-843I-CT-10 - 3 Channel Current Input Sensor with Channel to Channel Isolation, 10A
by ICP DAS

3-channel 10 amp current input sensor with channel to channel isolation. Monitors current from inverters in solar panel and wind turbine. Turn the current into measurable voltage. Has operating temperature ranges of -25°C ~ +75°C (-13°F ~ +167°F).

Description
Specification
Datasheet

The maximum input range for the DN-843I-CT-10 device is from ±1 A to +/- 50 A and can be attenuated to ±1.6 V to ±10 V. The "I" version provides 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with analog input modules such as I-7017 and I-87017 to measure the high current.

AC/DC Source Input
Linear Attenuation Ratio
High Current Input Measurement
Isolation Input
Channel to Channel Isolation
4 kV ESD Protection
RoHS Compliance
Operating Temperature: -25°C ~ +75°C (-13°F ~ +167°F)
Easily Wire Connection

General
Channels	3
Input Type	AC/DC Current
Input Range	+/- 10 A
Output Type	AC/DC Voltage
Output Range	+/- 10 Vpp
CT Type	Solid Core (closed)
Accuracy	1% of FSR
Channel to Channel Isolation	Yes, 3000 Vrms
Intra-module Isolation, Input to Output	3000 VDC
Bandwidth	50 KHz
Input Impedence	> 1 MΩ
EMS Protection
ESD (IEC 61000-4-2)	+/- 4 kV contact for power line, input and output channels, +/- 8 kV air for random point
Power Input
Input Range	+10 ~ +24 VDC
Power Consumption)	1.2 W
Mechanical
Dimensions (W x L x H)	148 mm x 83 mm x 39 mm
Power Consumption	1.2 W
Environment
Operating Temperature	-25°C ~ +75°C (-13°F ~ +167°F)
Storage Temperature	-30°C ~ +75°C (-22°F ~ +176°F)
Humidity	10% ~ 90% RH, Non-condensing